The KT-M is vertical and specializes in cutting doors and side panels. Its flexibility makes it possible to cut lengths and widths of doors and side panels. Its ergonomic design requires little space due to its small footprint of only 62 ft2.
- Semi-manual model
- 3 tools
- Machinable materials: wood, PVC,
steel and fibreglass
- Anti-chipping clockwise and
- Insulation removal router
This cutting center's ergonomic design requires little space due to its small footprint of only 62 ft2. Its blades are activated with 2 handles on either sides of the cart keeping the operator away from the cutting area.
The KT-M is equipped with a mobile cart positioned at the front and includes two blades of different diameters. These two blades work simultaneously in opposite direction in order to obtain a clean door cut.
The KT-M has an anti-scratch pneumatic gripper clamping system that holds the door or side panel in place during machining. Cutting becomes possible by manually moving the carriage from right to left on the cutting rail.
An optional router can be added to remove the insulation inside the door, either on the underside or in the side. This tool removes up to 2 inches deep into material, to place a new reinforcement block in the bottom or side of the door or side panel after the cut. It is also equipped with an adjustable stop system that limits the tool to move on its width and adapts to any door types.
A- 10’’ Clockwise Blade
B- 12’’ Counterclockwise Blade
C- Insulation Removal Router
Door Machining Center
Door Edge Machining Center
Vertical Door Machining Center
Copyright © Since 1994 EuGénie - All right reserved.
Manufacturer of doors and door frames machinery